Skip to content

Phone Number: +1 (214) 727 6289                             WhatsApp Number: +1 (214) 727-6289
Please use email 99% of the time as it is now very difficult to answer all the phone calls.
Email:    Phone Number: +1 (405) 927-8129       WhatsApp Number: +1 (214) 727-6289.
Please use email 99% of the time as it is now very difficult to answer all the phone calls.

Experts on Printing Quality

test image

30" Graphtec FC8600-75 High Performance Vinyl Cutting Plotter - Refurbished (1, 2, 3 or 4 Years Warranty)

Original price $3,999.00 - Original price $4,599.00
Original price
$3,999.00 - $4,599.00
Current price $3,999.00
Note: Choose between the 1, 2, 3 or 4 Years Warranty 

Key Features

  • Fastest cutting speed in its class
  • Highest cutting force in its class
  • Reliable long-length tracking
  • PERF CUT enabled high performance cutters finish the job
  • Auto mark detection
  • Segment area compensation
  • Multiple-Mark compensation


32-bit CPU
Grit rolling type
Drive method: 
Digital servo drive
Max. cross cut width: 
Number of push rollers: 
2 rollers
Max. cutting speed:
1485 mm/s at 45 deg. direction
Axial acceleration: 
Max. 39.2 m/s2 (4G) in 8 steps
Cutting force: 
Max. 5.88 N (600 gf) in 48 steps
Mechanical resolution: 
Programmable resolution: 
GP-GL: 0.1 / 0.05 / 0.025 / 0.01mm, HP-GL: 0.025mm
Distance accuracy: 
Max. 0.1mm or 0.1 % of plotted length
Max. 0.1mm in plot up to 2m (excluding the expansion and contraction of the media)
Minimum character size: 
Approx. 3mm alphanumeric (varies depending on character font and media)
Mountable number of tools
* 1 tool (cutting blade, plotting pen or pouncing tool) in standard;
* 2 tools (cutting blade and plotting pen) when second penholder (optional) is installed
Blade Type: 
Supersteel (0.9mm or 1.5mm diameter)
Pen Type: 
Water-based fiber-tip pen, Oil-based ballpoint pen
Pouncing tool type: 
Steel pin 1.2mm diameter, required optional pouncing tool (PPA 33-TP12)
Media types
* Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25mm thick
* Sandblast resist rubber up to 1mm thick
Compatible paper for pouncing: 
Regular paper from 0.06 to 0.13mm thick
Light pointer: 
Built into the tool carriage
 Built into the tool carriage
Perforation cutting: 
Supported (performed by force control)
Registration mark sensing system: 
Scans the mark by optical sensor (ARMS5.0), Segment area and Multiple-mark compensation, 4-points axis alignment, Auto mark detect
Standard interface: 
USB2.0 (High speed), RS-232C and Ethernet (10BASE-T/100BASE-TX)
Buffer memory: 
Command sets: 
GP-GL / HP-GL emulation (Set by menu or command and selects from GP-GL, HP-GL, or Auto select)
Condition settings: 
Dual configuration (save two user settings with eight separate condition setting for each user)
Graphic type LCD (3", backlight)
Power source:
100 V to 240 V AC, 50 / 60 Hz
Power consumption:
Max. 160 VA
Operating environment
10 to 35 Degree C, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy environment
61 to 90 Degree F (16 to 32 Degree C), 35 to 70 % R.H. (non-condensing)
Included software
Windows driver, Plotter controller, Graphtec Studio and Cutting Master 3
Max. cutting area (W x L )
30" x 164.04' (762mm x 50m)
Cutting area of guaranteed accuracy
29.21" x 50' (741.93mm x 15.24m)
Mountable media width
Min. 1.97" (5cm)
Max. 36.22" (92cm)
Compatible OS
Windows 10 / 8.1 / 8 / 7 / Vista
Mac OS 10.6 to 10.10
Compatible Standards
UL60950-1, cUL, CE mark (Low voltage and EMC), KC mark (Low voltage and EMC)
FCC-A, EN55022-A
Dimensions (W x D x H )
External: Approx. 50 x 28 x 48" (1270 x 711 x 1219mm)
115 lb (52kg)(Approx.) (Including stand