• SummaCut D120 48 in (120 cm) vinyl and contour cutting - New + 2 YEARS WARRANTY www.wideimagesolutions.com CUTTER 4299.99
1 1

www.wideimagesolutions.com

SummaCut D120 48 in (120 cm) vinyl and contour cutting - New + 2 YEARS WARRANTY

$4,299.99
$4,699.99
$4,299.99
Shipping calculated at checkout.
    SummaCut D120 48 in (120 cm) vinyl and contour cutting - New + 2 YEARS WARRANTY www.wideimagesolutions.com CUTTER 4299.99

    Tech Specs

    Business Financing Available

                       

    MODELS

    D60

    D75

    D120

    D140

    D160
    CUTTING TYPE Drag knife with TurboCut and Tangential Emulation Modes
    TOOL COMPATIBILITY Blade, Pen, Pounce Tool
    CUTTING WIDTH 23 inch (60 cm) 29 inch (74 cm) 47 inch (120 cm) 53 inch (135 cm) 62 inch (158 cm)
    CUTTING SPEED All SummaCut models cut at speeds up to 44 inches per second (113 cps) diagonal
    AXIAL SPEED Up to 2 G
    ALIGNMENT TYPE
    • OPOS X
    • Barcode job recognition
    • Up to 2 x 64 marks on the X-line
    • Y-Line compensation
    MAXIMUM ACCELERATION Up to 3 G diagonal
    TRACKING PERFORMANCE Within ± 0.004 in. (± 0.1 mm) on plots up to 26 ft. long (8 m) on rolls up to 760 mm wide
    Within ± 0.004 in. (± 0.1mm) on plots up to 13 ft. (4 m) long on rolls over 760 mm wide
    CUTTING FORCE 0-400 grams of down-force, in 5 gram increments
    REPLOT MEMORY 4 MB (buffer size: 16 MB)
    DISPLAY LANGUAGES English; French; German; Dutch; Italian; Spanish; Polish; Lithuanian
    CONNECTIVITY USB, Serial RS232, Ethernet (only on SummaCut D120, D140 - not FX - & D160)
    POWER REQUIREMENTS 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
    DIMENSIONS 39 (W) x 13.8 (D) x 11 (H) in. (100 (W) x 35 (D) x 30 (H) cm) 45 (W) x 13 (D) x 11 (H) in. (115 (W) x 35 (D) x 30 (H) cm) 63 (W) x 26.8 (D) x 45 (H) in. (160 (W) x 68 (D) x 114.5 (H) cm) 68 (W) x 26 (D) x 45 (H) in. (175 (W) x 68 (D) x 114.5 (H) cm) 77 (W) x 26 (D) x 45 (H) in. (198 (W) x 68 (D) x 114.5 (H) cm)
    WEIGHT 33 lbs (15 kg) 37 lbs (17 kg) 92 lbs (42 kg) 106 lbs (48 kg) 119 lbs (54 kg)
    OPERATING TEMPERATURE 59˚ to 95˚F (15˚ to 35˚C)
    STANDARD ACCESSORIES WinPlot or MacSign Cut Software, CutterControl Parameter Software, CD w/ Manuals and Drivers, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), 1 Spare Fuse, Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades.
    OPTIONAL ACCESSORIES Stand or Basket for SummaCut D60 / SummaCut D75