PLOTTER PARTS

Part Number 5 16MB EDO (Extended Data Output) DRAM DIMM memory module C6074-60003 is compatible with: HP DesignJet 1050C Printer HP DesignJet 1055...

Part Number 5 32MB EDO (Extended Data Output) DRAM DIMM memory module C6074-60004 is compatible with: HP DesignJet 1050C Printer HP DesignJet 105...

Part Number 5 64MB EDO (Extended Data Output) DRAM DIMM memory module C6074-60005 is compatible with: HP DesignJet 1050C Printer HP DesignJet 105...

Part Number 6 *Contact us for pricing

Part Number 6 *Contact us for pricing

Part Number 7 Left rear cover kit - Covers electronics module near the DIMM cover - Includes ferrite and clip C6072-60171 is compatible with: HP ...

Part Number 8 and 10 *Contact us for pricing

Part Number 10 Right rear cover - Covers the end of the electronics module that is not near the DIMM cover C6072-60172 is compatible with: HP Desi...

Part Number 11 Electronics module board for HP designJet plotters 1050C and 1055CM units. (for Plus version order C6075-69280). C6072-60146 is comp...

EIO cover - Used when an EIO slot is empty C6072-60177 is compatible with: HP DesignJet 1050C Printer HP DesignJet 1050C Plus Printer HP DesignJet...

Part Number 1 Right cover - Includes front panel cable - Does not include front panel assembly or aerosol fan C6072-60165 is compatible with: HP D...

Part Number 3 Right trim - On the right arm (Includes Window Sensor)  C6072-60174 is compatible with: HP DesignJet 1050C Printer HP DesignJet 105...

 Part Number 4 *Contact us for pricing 

Part Number 6 FRONT PANEL SEV-RCFront panel assembly - Includes front panel cable (has 4 buttons Cancel, print quality button, form feed button, an...

C6071-60154 is compatible with: HP DesignJet 1050C Printer HP DesignJet 1050C Plus Printer HP DesignJet 1055CM Printer HP DesignJet 1055CM PLUS Pr...

Part Number 1 Left hand cover - Covers the ink tube system and has a door to access the ink cartridges C6072-60167 is compatible with: HP DesignJe...

Part Number 3 Left Hand Trim - For HP DesignJet 1050C and 1055CM Printers C6072-60173 is compatible with: HP DesignJet 1050C Printer HP DesignJet ...

Part Number 6 Lift-up viewing window C6072-60164 is compatible with: HP DesignJet 1050C Printer HP DesignJet 1050C Plus Printer HP DesignJet 1055C...

Screw (for rear door to access the Ink Tubes System) *Contact us for pricing

Part Number 7 Ink Tubes System (Includes Setup Printheads, Ink Collector, Carrier Clip, Nye Oil and ISS Housing Foam) C6072-60145 is compatible wit...

Part Number 8 *Contact us for pricing

Part Number 8 *Contact us for pricing

Part Number 9 Adobe Logo Label (Only for HP DesignJet 1055CM) C4704-00119 is compatible with: HP DesignJet 3500CP Printer HP DesignJet 1055CM Prin...

Setup printhead kit - Used to remove air and prime the ink system (4 included) C6071-60167 is compatible with: HP DesignJet 450c printer e/a0-siz...

Part Number 1 Service Station Assembly (Includes Drop Detector and Primer Assembly) C6072-60178 is compatible with: HP DesignJet 1050C Printer HP ...

Part Number 4 Vacuum/aerosol fan assembly - Includes the fan and air flow guide C6072-60159 is compatible with: HP DesignJet 1050C Printer HP Desi...

Part Number 6 *Contact us for pricing

Part Number 7 Paper-axis motor - Includes helical gear and grease - Motor that provides power to feed paper for printing process C6072-60160 is com...

DESCRIPTION Drop detector (sensor) assembly Includes spittoon foam Installed in service station assembly C6072-60179 is compatible with: HP Desi...

Part Number 1 Ink Supply Station (ISS) - Has 4 slots for ink cartridges C6072-60015 is compatible with: HP DesignJet 1050C Printer HP DesignJet 10...

DESCRIPTION Part Number 2 Air pressurization system (APS) Includes pump, valve, pressure sensor, and APS housing C6072-60016 is compatible with: ...

Ink leak detector system (LDS) - Includes ink collector, leak sense cable, leak sense cable clip C6071-60168 is compatible with: HP DesignJet 1050...

DESCRIPTION Part Number 1 Clutch assembly Includes: Lever, 2 gears, a spring, and the shaft that they ride on. C6072-60151 is compatible with: ...

DESCRIPTION Carriage assembly kit - Includes carriage, carriage cutter assembly, and line sensor - Does not include cable C6072-60147 is compatibl...

Part Number 2 Cutter assembly kit - Includes mounting hardware - Installed under carriage assembly C6072-60200 is compatible with: HP DesignJet 1...

Part Number 3 *Contact us for pricing

Part Number 4 *Contact us for pricing

DESCRIPTION Trailing cable for HP DesignJet Jet Plotters, attaches to carriage unit - 36 inch cable kit with 3 cables, only trailing cables include...

Carriage Height Tool (Also Included with the Carriage Assembly) C6071-60166 is compatible with: HP DesignJet 1050C Printer HP DesignJet 1050C Pl...

*Contact us for pricing Part Number 1  

Part Number 5 Cutter Actuator Arm (also included with Tensioner Assembly) C6072-60199 is compatible with: HP DesignJet 1050C Printer HP DesignJet ...

Part Number 7 Encoder strip for HP DesignJet 1050C Series C6072-60197 is compatible with: HP DesignJet 1050C Printer HP DesignJet 1050C Plus Print...

Part Number 8 Nut for HP DesignJet 1050C and 1055CM Printers *Contact us for pricing

Part Number 9 Washer for HP DesignJet Printers  *Contact us for pricing

Part Number 10 Left Rollfeed Module C6072-60158 is compatible with: HP DesignJet 1050C Printer HP DesignJet 1050C Plus Printer HP DesignJet 1055C...

Part Number 11 Right Rollfeed Module C6072-60155 is compatible with: HP DesignJet 1050C Printer HP DesignJet 1050C Plus Printer HP DesignJet 1055C...

Part Number 12 Right roll feed brake - Installed in right roll feed module C6072-60156 is compatible with: HP DesignJet 1050C Printer HP DesignJet...

Part Number 15 Left roll feed brake - Installed in left roll feed module C6072-60157 is compatible with: HP DesignJet 1050C Printer HP DesignJet ...