MIMAKI

Description This Inclination Adjustment Lever is suitable for Mimaki JV33 printers. This is the original Mimaki part (number M602126). Pri...

Description This set of 4 head FFC cable Assy is suitable for Mimaki JV34-260 printers. This is the original Mimaki part (number E300823). Each...

Description This UJF-3042 Slider Relay Slides Cable - E106270 is suitable for Mimaki printers. This is Mimaki original part (number E106270). ...

Description This Power Supply 240W 42V is suitable for Mimaki CJV150, CJV300, JV150 & JV300 series printers. This is the original Mimaki pa...

Description This E-Ring is suitable for Mimaki JV5 printers. This is the original Mimaki part (number E-9). Printer compatibility Mimaki ...

Description This X-relay board is suitable for Mimaki JV33 series printers. This is the original Mimaki part (number E104856). This board manag...

Description This generic, high quality flat cable card is suitable for Mimaki JV5-160S printers. Mimaki part number for this cable is L1-40-46...

Description This generic Bearing is suitable for Mimaki JV5-320S & JV5-260S printers. It corresponds to the original Mimaki part (numb...

Description This Cap Rubber (R) is suitable for Mimaki TX400-1800B & TX400-1800D printers. This is the original Mimaki part (number M700552...

Description Original Y motor assembly (carriage motor) with fitted gear suitable for Mimaki JV3 and JV22 printers. This is the original Mimaki ...

Description This Bearing is suitable for Mimaki JV5-320S & JV5-260S printers. This is the original Mimaki part (number MR148ZZ). This Be...

Description This Pen Line Rubber 30-100 is suitable for Mimaki CJV30-100, CJV30-100BS & TPC-1000 printers. This is the original Mimaki part...

Description This CJV30-130 Pen Line Rubber L: 1450mm W: 8.5mm (1 pc) - SPC-0555 is suitable for Mimaki printers. Printer compatibility Mi...

Description This Cap Slider Assy is suitable for Mimaki UJF-3042HG printers. This is the original Mimaki part (number M012151). Printer co...

Description This set of 2 generic compression Dampers is suitable for Mimaki JV34 printers. This is a high quality part that corresponds to Mimak...

Description This JFX200-2513 Y Linear Encoder Scale 3550 - E301012 is suitable for Mimaki printers. This is Mimaki original part (number E30101...

Description This stepping Motor without pulley is suitable for Mimaki JV5, JV33, CJV30 & JF series printers. This is the original Mimaki pa...

Description This X motor without pulley (feed Motor) is suitable for Mimaki JV33 printers. This is Mimaki original Mimaki part (number E300532)...

Description This power unit PCB board is suitable for Mimaki JV33 printers. This is the original Mimaki part (number M013520 replacing number E...

Description This ID PCB Cover is suitable for Mimaki JV5, CJV30, JV33 printers. This is the original Mimaki part (number M601869). Printer...

Description This ink leak sensor PCB is suitable for Mimaki JV5 printers. This is Mimaki original part (number E104534). Printer compatibil...

Description This generic pump head is suitable for Mimaki JFX series printers. I corresponds to the original Mimaki part (number WPX1-(W)B2-B)....

Description This Wiper Belt is suitable for Mimaki JFX500-2131 printers. This is the original Mimaki part (number 40S2M950). This Belt has a c...

Description This Valve Assy is suitable for Mimaki UJF-7151 printers. This is the original Mimaki part (number E106658). Printer compatibi...

Description This Sending diaphragm pump is suitable for Mimaki UJF-7151 Plus printers. This is Mimaki original part (number E301266 / E301267 )...

Description This Degassing Module is suitable for Mimaki TS500-1800 printers. This is the original Mimaki part (number M801432). Printer c...

Description Mimaki SS21 is a fast drying solvent ink with superior adhesion to media, paired with a brilliant colour reproduction for high sp...

Description This cartridge sensor is suitable for Mimaki JV3 printers. This is the sensor only from part number E102545 that can be easily repl...

Description This head Up and Down scale is suitable for Mimaki JV5 printers. This is a high quality generic part that corresponds to Mimaki par...

Description This generic paper sensor board is suitable for Mimaki JV5 printers. It corresponds to the original part (number E103960 replacing ...

Description This Cap Top Base Assy For Maintenance is suitable for Mimaki SWJ-320 printers. This is the original Mimaki part (number M016132). ...

Description This set of 20 black nylon UV resistant male luer lock stoppers is suitable for Mimaki UJF-3042 printers. This is the original Mima...

Description This Solenoid Valve (2 Pos / 8 Ports) is suitable for Mimaki UJV-160 printers. This is the original Mimaki part (number E300596). ...

Description This Absorber HD is suitable for Mimaki JV5 printers. This is Mimaki original part (number M904731). Printer compatibility Mi...

Description This Absorption pad HD is suitable for Mimaki JV5 series printers. This is Mimaki original part (number M904725). Printer comp...

Description This Sub Tank Assy is suitable for Mimaki UJV100-160 printers. This is Mimaki original part (number MP-M012080). Printer compa...

Description This clamp sensor assy is suitable for Mimaki CG-FX series cutting plotters. This is the original Mimaki part (number E104436 repla...

Description This Throttle Valve (Union Straight Fitting) is suitable for Mimaki JFX series printers. This is the original Mimaki part (number J...

Description This Wiper Slider 33 is suitable for Mimaki JV33 printers. This is Mimaki original part (number M602093). Printer compatibilit...

Description This X Motor with pulley (feed motor) is suitable for Mimaki JV33 printers. This is the original Mimaki part (number M007619). The ...

Description This generic flat cable FFC (P1.25-28-4300MM) is suitable for Mimaki JFX-1631 printers. This is a high quality generic cable that c...

Description This solenoid valve is suitable for Mimaki UJV-160 printers. This is the original Mimaki part (number E300597). Printer compat...

Description This Cap Plate right is suitable for Mimaki UJF-3042 & UJF-6042 printers. This is the original Mimaki part number (M602803 repl...

Description This set of 2 generic capping assy is suitable for Mimaki JV5 printers. This high quality capping assy includes capping and base. ...

Description This torque limiter is suitable for Mimaki JV2-180 / JV3-160SP / CJV30 printers. This is the original Mimaki part (number MK-12). ...

Description This set of 20 head filters is suitable for Mimaki JFX500-2131, UJV500-160, TS500 and TX500 series printers. This is the original M...

Description This CP Joint is suitable for Mimaki CJV30 & JV33 series printers. This is the original Mimaki part (number M602095). Print...

Description This toothed belt is suitable for Mimaki CG-130 FX printers. This is a high quality generic part that corresponds to Mimaki origina...