HP Z Series Printers

DESCRIPTION Carriage assembly - Includes: Carriage frame with rail bushings (Q1273-60231) Printhead cover with flex cables (Q6651-60337) Paper cut...

DESCRIPTION Designjet T7100 Carriage Motor Part Number 2 System errors related to the carriage motor: Code 42:03 Code 42:10 COMPATIBILITY HP Des...

DESCRIPTION 512MB SDRAM for Designjet Z6200, Z6600, Z6800, and T7100 printers. System error codes related to the memory module: Error 05.3:10 Err...

DESCRIPTION HP Designjet Z6100, Z6200, T7100 Print Platen Assembly 42" Plotters This assembly helps move the media through the printer and provides...

DESCRIPTION Carriage PCA board - For DesignJet printers  Condition: This is a fully tested and guaranteed refurbished part. COMPATIBILITY HP Desig...

DESCRIPTION Carriage assembly flex cables - For the DesignJet Z6100 printer series Condition: This is a fully tested and guaranteed refurbished par...

DESCRIPTION Ink Supply Tubes - For the 24-inch DesignJet Z2100 photo printer series COMPATIBILITY HP DesignJet Z2100 24-IN Photo Printer HP Design...

DESCRIPTION Ink tube system that connects the ink supply station to the print heads in the carriage. It runs the length of the plotter and moves wi...

DESCRIPTION Ink Supply Tubes - For the 44-inch Designjet photo printer series COMPATIBILITY HP DesignJet z5200 44-in photo printer HP DesignJet Z2...

DESCRIPTION Service station - For the Designjet Z photo printer series - Includes drop detector aerosol fan assembly primer assembly and service st...

Description: Service station - For the Designjet Z photo printer series - Includes drop detector aerosol fan assembly primer assembly and service s...

DESCRIPTION Formatter (main logic) board - For the DesignJet Z2100 photo printer series - Version TR8-RO 4.0.0.6 COMPATIBILITY HP DesignJet Z2100 ...

Description This the direct replacement part the IDE type hard disk drive mounted on the formatter board. New Firmware Revision TR8-TR_10.0.0.4 In...

DESCRIPTION This the direct replacement part the SATA type hard disk drive mounted on the formatter board. New Firmware Revision TR8-TR_10.0.0.4 I...

DESCRIPTION This the direct replacement part the SATA type hard disk drive mounted on the formatter board. New Firmware Installed on 320GB SATA Ha...

DESCRIPTION Main PCA Controls and drives the printer Includes the power supply unit (PSU) assembly For the 24-inch DesignJet Z2100/3100 photo prin...

* Q6675-60023 was Q6677-67014 * DESCRIPTION Main board and Power Supply for the Designjet Z2100 and Z3100 plotters. Replacement part for 24" and 44...

Description: Power Supply & main board for the Z2100 Revision D plotters. Condition: This is a fully tested and guaranteed refurbished part. Co...

DESCRIPTION Z3100/Z2100 Main PCA only for HP Z3100 Z2100 series plotters. (for Main PCA and power supply unit order Q6677-67014). COMPATIBILITY ...

DESCRIPTION Designjet Z2100, Z3100 Main PCA (Logic Board) 44" or 24" Plotters. This item is the Main board for the Designjet Z2100 and Z3100 plott...

Description: Main logic board assembly that attaches to the power supply and provides the port for the formatter board, for the Designjet Z5200 and...

DESCRIPTION Print mechanism PC board - Controls the funtion of the print mechanism - For the Designjet photo printer series COMPATIBILITY HP Desig...

NOTE: The printer's hard drive is paired to the printmech PCA. If you replace the printmech PCA, you must also install a new, un-paired hard drive....

* Return defective for $50.00 refund * DESCRIPTION Carriage assembly - Designjet Plotters - For the 44-inch Designjet Z2100 series printer Carriage...

This carriage assembly DOES NOT INCLUDE THE COLOR SENSOR (ESP) DESCRIPTION The carriage is the part that carries the print heads, connects to the i...

Description: Color sensor ESP (spectrophotometer) - For the DesignJet Z2100/Z3100/Z3200 photo printer series Note: Ordering this part, you can als...

* Return defective for $50.00 refund * DESCRIPTION Carriage assembly - Includes line sensor cover latch PC board (PCA) For the 24-inch Designjet Z2...

Description:HP Carriage with line sensor, carriage cover, carriage latch, carriage PCA, spectrophotomer (color sensor), rear bushing, LPS brand bel...

Description: ISS for the Designjet Z Series plotters. This is the mechanism that the ink cartridges plug into and pumps ink through the ink tubes t...

Description: ISS for the Designjet Z Series plotters. This is the mechanism that the ink cartridges plug into and pumps ink through the ink tubes t...

Description:Front Control Panel for the Designjet Z2100 and Z5200 printers. Replacement part for 24" and 44" Designjet printers. Condition: This is...

Description:44-inch take-up reel Spindle & Hub Shaft assembly that holds the paper roll for paper feed and storage. Includes media hubs for 2" ...

DESCRIPTION Left side spindle holder COMPATIBILITY HP DesignJet Z3200 24-IN Photo Printer HP DesignJet Z3200 24-in Photo Printer HP DesignJet Z320...

DESCRIPTION Right side spindle holder COMPATIBILITY HP DesignJet Z3200 24-IN Photo Printer HP DesignJet Z3200 24-in Photo Printer HP DesignJet Z32...

Description:  This is the spindle bracket that supports the spindle. Variant brackets and holders available. Q5669-60711, Q6718-67008, Q5669-60712,...

Description:  This is the plastic and metal strip that spans the entire printer and goes through the carriage. The strip provides a reference for c...