CUTTERS

SPECIFICATIONS A computer with a USB-A Port is required to operate this equipment. Contents: Vinyl Express Q42 Gen 3 - 42 inch Vinyl Cutter, Stand...

SPECIFICATIONS A computer with a USB-A Port is required to operate this equipment. Contents: Vinyl Express Q54 Gen 3 - 54 inch Vinyl Cutter, Stand...

SPECIFICATIONS A computer with a USB-A Port is required to operate this equipment.  Contents: Vinyl Express Q64 Gen 3 - 64 inch Vinyl Cutter, Stan...

DESCRIPTION Refurbished and upgraded cutting mechanism for cutting roll paper after print job is completed.The cutter blade has been sharpened by p...

*Get $10 back when you return your old cutter. Prepaid return label included.* Description Cutter assy serv RoHS Cutter assembly For HP Z6200 T7100...

*Part 792900970 is the replacement of the part no. 621352000 (discontinued)* Part Number 15

DESCRIPTION Refurbished and upgraded cutting mechanism for cutting roll paper after print job is completed. The cutter blade has been precision gro...

Description:  These cutters have been sharpened by precision grinding and have a new long-life guide roller installed. System errors related to the...

DESCRIPTION Carriage with cutter Assembly - For the Designjet T770/T790/T1200/T1300/T2300 printer series COMPATIBLE WITH HP DesignJet t1200 44-...

* CN727-67023 was CH538-67019 * DESCRIPTION Cutting device that cuts roll media after a print job is finished Cutter Assembly for DesignJet T790, ...

* CN727-67023 was CH538-67019 * DESCRIPTION Cutting device that cuts roll media after a print job is finished Cutter Assembly for DesignJet T790, ...

DESCRIPTION Stock Roller for Graphtec FC8000-130 / FC8600-130 (621430150) Part Number 4

Description This generic set of 5 blades with spring is suitable for Graphtec cutting plotters using CB09N cutter holders (for φ 0.9 mm blades)...

Description This generic set of 5 blades with spring is suitable for Graphtec cutting plotters using CB09N cutter holders (for φ 0.9 mm blades)...

Description This generic set of 5 blades is suitable for Graphtec cutting plotters using a CB15N cutter holder (for φ 1.5 mm blades). These bla...

Description This drag knife is available with a cutting angle of 30°, 45° or 60° - depending on the operational area, offset 0,25mm. This is th...

Description This generic set of 5 blades is suitable for Graphtec cutting plotters using a CB15N cutter holder (for φ 1.5 mm blades). These bla...

Description This drag knife is available with a cutting angle of 30°, 45° or 60° - depending on the operational area, offset 0,25mm. This is th...

Description This original set of 3 blades is suitable for Roland cutting plotters and printers. These blades have a cutting angle of 45° and an...

Description This PAD, CUTTER is suitable for Roland VG-640 printers. This is the original Roland part (number 1000014399). Printer compati...

Description This PAD,CUTTER is suitable for Roland VG-640 printers. This is the origignal Roland Part (1000020747) replacing 1000014399. P...

Description This original set of 5 blades is suitable for Summa S Class T-Series cutting plotters. These blades have a cutting angle of 36°. Th...

Description This pad cutter is suitable for Secabo 30 Series cutting plotters. This is the original Secabo part. Printer compatibility S...

Description This pad cutter is suitable for Secabo C60 Series, S60 & T60 cutting plotters. This is the original Secabo part. This pad cutte...

Description This original blade is suitable for Summa S Class T-Series cutting plotters. This blade has a cutting angle of 60°. This blade is s...

Description This pad cutter is suitable for Secabo C120, S120 & T120 cutting plotters. This is the original Secabo part. This Pad Cutter is...

Description This pad cutter is suitable for Roland GX-500 printers. This is the original Roland part (number 1000001383). This pad cutter is 13...

Description This original set of 2 blades is suitable for Roland cutting plotters and printers. These blades have cutting angle of 55° and an o...

Description This single original blade is suitable for Summa S Class D-Series cutting plotters. It has a cutting angle of 60°, an offset value ...

Description This set of 5 blades is suitable for Roland cutting plotters and printers. This blade has a cutting angle of 32° and an offset valu...

Description This original set of 5 blades is suitable for Roland cutting plotters and printers. These blades have a cutting angle of 60° and an...

Description This original set of 5 blades is suitable for Roland cutting plotters and printers. These blades have a cutting angle of 60° and an...

Description This Tangential Cutter is suitable for Mimaki CF / CF2 series cutting plotters. This is the original Mimaki part (number SPB-0009)....

Description This generic, high quality cutter holder has a diameter of 1.5mm. It is suitable for Summa S-Class / SummaSign / Summacut cutting p...

Description This D-HEAD SS/ALL SC is suitable for Summa SummaSign & SummaCut cutters before November 2011. This is the original Summa part ...